Skip to content
EN IT
Download

F1 25 (2026 Season Pack) UDP Telemetry Setup for PlayStation 5

You can stream real-time telemetry from EA SPORTS F1 25 with the 2026 Season Pack on PlayStation 5 to PitStatus running on a Windows PC over your local home network. This gives console racers access to lap delta comparisons, tyre degradation charts, and ERS telemetry.

The steps below explain how to connect your PS5 to your computer, confirm telemetry reception, and solve network configuration issues.

Step-by-step PlayStation 5 setup

  1. Find your PC local IP address: Open PitStatus on your Windows PC and open the Game Setup panel (or Connection panel) to read your primary local IP address.
  2. Verify home network connection: Confirm that your PlayStation 5 and Windows PC are connected to the same home router, avoiding guest Wi-Fi networks that block inter-device traffic.
  3. Open the telemetry settings on PS5: Launch EA SPORTS F1 25 with the 2026 Season Pack on your PS5, go to the main menu, and select Options > Settings > Telemetry UDP (or Game Settings > UDP Telemetry).
  4. Turn on UDP Telemetry: Change the UDP Telemetry option to On to start broadcasting telemetry data from your console.
  5. Select your transmission method:
    • Direct IP (recommended): Set UDP Broadcast Mode to Off, and enter the local IP address of your Windows PC into the IP Address field. This method is the most reliable across Wi-Fi.
    • Broadcast mode (alternative): Set UDP Broadcast Mode to On (the game ignores the IP Address field). Use this if you do not want to enter an IP, provided your router allows subnet broadcast traffic.
  6. Set the UDP port: Enter 20777 as the UDP Port to match the default listening port in PitStatus.
  7. Configure send rate and format: Set UDP Send Rate to 60 Hz, and confirm UDP Format is set to 2026.
  8. Enable public telemetry: Set Your Telemetry to Public and Show Online ID to On so you can capture rival data in online multiplayer races.
  9. Take to the circuit: Drive out of the pit lane onto the track so the game begins sending the live telemetry stream.

Check that data is arriving

You can confirm that PitStatus is picking up your PS5 telemetry stream through these in-app indicators:

  • The connection indicator in the top header and inside the Game Setup panel switches to a solid green dot labelled "F1 Connected · Data arriving".
  • The connection status confirms active reception, accompanied by the detected circuit name and session category (Practice, Qualifying, or Race).
  • If you are still in the main menus or sitting parked in the garage, the game only transmits occasional heartbeats; live telemetry begins as soon as the car is rolling on track.

Common problems

  1. PS5 and PC on separated subnets or guest Wi-Fi: If your PS5 is on a guest Wi-Fi band while your PC is on Ethernet or the main Wi-Fi, the router prevents cross-device communication. Reconnect both systems to the same private home network.
  2. PC IP address changed after router reboot: When routers use dynamic DHCP assignments, your PC local IP address can change over time. Verify the IP address shown in PitStatus and update the IP Address field in the PS5 F1 25 (2026 Season Pack) menu accordingly.
  3. Router blocking UDP broadcast data: If you selected broadcast mode and PitStatus receives no data, your Wi-Fi router may be filtering broadcast data between wireless and wired clients. Switch UDP Broadcast Mode to Off on your PS5 and enter your PC direct local IP address instead.
  4. Windows Firewall blocking incoming console data: Windows Firewall may block incoming UDP data arriving from external devices on your home network. Click "Repair Windows Firewall" in PitStatus to ensure an inbound rule for UDP port 20777 is configured for the local subnet.
  5. Telemetry options locked in the PS5 menu: If the telemetry fields in the F1 25 (2026 Season Pack) settings cannot be modified, open the game's general settings and change the driving style to "Expert" to unlock all configuration options.

See it on your own laps

Install PitStatus, drive a session and open the Engineer.

Download for Windows

Free. Windows 10 and 11. Works with F1 25 (2026 Season Pack) on PC, PS5 and Xbox Series X|S.