Skip to content
EN IT
Download

F1 25 (2026 Season Pack) Track Map Telemetry and Circuit Analysis

PitStatus maps high-frequency telemetry data directly onto realistic track layouts. You can view speed traces, braking zones, and time deltas along the circuit, divided into microsectors. It lets you visualise exactly where and how time differences emerge on the circuit.

The problem

Interpreting distance-based graphs can feel disconnected from your real visual landmarks on track. It is difficult to tell whether a braking deficit occurred before or after a braking marker board, or how far your rival carried momentum through a complex of fast curves. Without a geometric representation of your run, identifying the physical location of driving errors is slow and frustrating.

What you see

The track map displays a clean rendering of the circuit with official corner numbers, sector lines, and individual microsector segments. Data channels can be mapped onto the circuit path using colour gradients, showing speed variations or delta gains at a glance.

PitStatus Maps Zandvoort · Qualifying

The Chase Cam follows both cars along the lap: press Play and pick which one to follow.

PitStatus Chase Cam Zandvoort · Qualifying
The same Chase Cam in 3D, as you see it in the app.

When comparing two laps, the map renders two parallel lanes side by side: P1 on the right and P2 on the left of the driving direction. A clear marker at the start-finish line indicates which lane corresponds to each driver. Selecting a zone in the Race Engineer frames the chosen corner, aligning with the synchronised cursor on your telemetry graphs.

How to use it in a race weekend

  1. Open the track map view following a practice stint to review circuit-wide speed progression.
  2. Select your lap as P1 and a faster benchmark driver as P2 to generate the parallel lane comparison.
  3. Check the microsector colouring to isolate which turn of a multi-apex chicane created a deficit.
  4. Focus on heavy braking corners to correlate braking application points with physical trackside landmarks.
  5. Use the visual reference to adjust your turn-in point and throttle application line in the next session.

Review connection procedures for your platform in UDP telemetry setup or explore automated corner recommendations in the Race Engineer.

See it on your own laps

Install PitStatus, drive a session and open the Engineer.

Download for Windows

Free. Windows 10 and 11. Works with F1 25 (2026 Season Pack) on PC, PS5 and Xbox Series X|S.